ANTIFREEZE PF A11 ― BLUE COLOUR
AVENO Antifreeze A11 is a high-quality, ethylene glycol-based radiator protection agent that has been specially developed for older vehicle models and modern vehicles with conventional cooling systems. It offers effective protection against frost, corrosion and overheating.
Concentrated Antifreeze – Blue
(Recommended mixing ratio is 25% Coolant and 75% Water)
Instructions for use
The product contains a combination of silicates and proven inhibitors that ensure reliable protection for metal components such as aluminum, copper and cast iron. It is compatible with a wide range of vehicles and meets the requirements of many car manufacturers.
Note: AVENO Antifreeze A11 should not be mixed with silicate-free coolants or coolants with other chemical base formulations to ensure optimum performance and protection.
Instructions for use:
Dilution: AVENO Antifreeze A11 must be mixed with fresh water before use. Preferably use distilled or deionized water to avoid deposits and extend the service life of the cooling system. Compatibility: Suitable for older vehicles and vehicles with conventional cooling systems, including aluminum and cast iron components.
Change intervals: The change intervals should be observed in accordance with the vehicle manufacturer’s specifications. The cooling system should be thoroughly flushed before changing.
Mixing table:
| Frost protection up to approx. | Proportion of frost protection | Proportion of water |
| -12°C | 25% | 75% |
| -20°C | 35% | 65% |
| -40°C | 50% | 50% |
| -50°C | 60% | 40% |
(Recommended mixing ratio is 25% Coolant and 75% Water)
Quality classification
Recommendation:
- AFNOR R15-601
- ASTM D1384
- ASTM D2809
- ASTM D3306
- ASTM D4340
- ASTM D4985
- ASTM D6210 Type 1-FF
- BS 6580 (GB)
- Chrysler MS-7170
- CUNA NC 956-16 (Italien)
- Fiat 9.55523
- Fiat PARAFLU 11
- Ford WSS-M97B51-A1
- IVECO 18-1830
- JIS K 2234 (Japan)
- MAN 324 NF
- O Norm V 5123 (Österreich)
- SAE J1034
- Suzuki
- UNE 25-361 (Spanien)
- VW TL 774-C (entspricht G11)
Properties
- Reliably protects the cooling system against frost down to -37 °C (with 1:1 mixture).
- Contains proven inhibitors that protect all metal components in the cooling system.
- Provides a protective film on metal surfaces and prevents corrosion and deposits.
- Suitable for vehicles with older cooling systems.
- Meets international standards and requirements.
Technical Specifications
| Properties | Data | Unit | Testing under |
|---|---|---|---|
| Appearance | BLUE | VISUELL | |
| Density at 15°C | 1126 | kg/m³ | DIN EN ISO 12185:2024-06 |
| Flash Point (COC) | 112 | °C | DIN 51758 |
| Freezing Point | -37 | °C | ASTM D 1177 |
| Boiling Point | 155 | °C | ASTM D 1120 |
| pH-Value at 20°C (50 Vol %) | 8.4 | ASTM D 1287 | |
| Reserve alkalinity | <20 | ml0,1nHCL | ASTM D 1121 |
| Water content | <5 | Gew. % | ASTM D 1123 |
All declared values are approximate and subject to standard production variations.
To the best of our knowledge all information reflects the current state of findings and our development. Subject to change. Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician.
Related products
Aisin Warner AW-1
RM248.00
All Products
RM219.00
GM Dexron® III H
RM48.00
Out of stock
All Products
Out of stock
MIL-L-2105 D
RM60.00
All Products
All Products
RM238.00
Out of stock
All Products