DXS Premium 0W-20
RM280.00
AVENO DXS Premium 0W-20 is a synthetic Mid SAPS smooth-running engine oil for petrol car engines with or without turbocharging and direct injection. AVENO DXS Premium 0W-20 is characterized by its excellent cold starting properties, minimization of fuel consumption, friction and wear. Extended oil change intervals as per manufacturer’s instructions.
Instructions for use
AVENO DXS Premium 0W-20 is an energy-efficient engine oil for year-round use, and is ideal for modern petrol car engines. According to dexos1™ Gen3 specification it is recommended for General Motors under all operating conditions. The product is also used when the vehicle manufacturer requires the API SQ or ILSAC GF-7A specification. The AVENO DXS Premium 0W-20 is also suitable for use in modern hybrid vehicles with petrol or diesel engines. It meets the special requirements of hybrid drive systems, including frequent start-stop cycles and low operating temperatures. The operating instructions of the vehicle and engine manufacturers must be observed.
Quality classification
Specification:
- API SQ (RC)
- API SP
- ILSAC GF-7A
- ILSAC GF-5/GF-6A
Approval:
- API SQ (RC)
- ILSAC GF-7A
Recommendation:
- dexos1™ Gen3
- Fiat 9.55535-GSX/-CR1
- Ford WSS-M2C947-B1, Ford WSS-M2C962-A
- Chrysler MS-6395
- GM 6094M
Properties
- A very stable and excellent viscosity behavior and shear stability
- Very good detergent and dispersing properties
- Excellent protection against wear, corrosion and foaming
- High oxidation stability
- Excellent cold starting properties
- Fuel savings under all operating conditions
- Neutrality towards sealants
- Suitable for catalytic converters
- A secure lubricant film at very high operating temperatures
Technical Specifications
| Properties | Data | Unit | Testing under |
|---|---|---|---|
| Kinematic viscosity at 40°C | 44.2 | mm²/s | DIN 51659-2:2017-02 |
| Kinematic viscosity at 100°C | 8.4 | mm²/s | DIN 51659-2:2017-02 |
| Viscosity index | 169 | DIN ISO 2909:2004-08 | |
| Appearance | YELLOWBROWN | VISUELL | |
| Density at 15°C | 846 | kg/m³ | DIN EN ISO 12185:1997-11 |
| Pour Point | -48 | °C | ASTM D 7346:2015 |
All declared values are approximate and subject to standard production variations.
To the best of our knowledge all information reflects the current state of findings and our development. Subject to change. Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please
consult a technician.
Related products
All Products
RM285.00
MIL-L-2104 D
RM116.00
All Products
RM82.00
ACEA E6/E7/E8/E9/E11
RM210.00
All Products
RM93.00
All Products
RM165.00
Aisin Warner AW-1
RM298.00
All Products
RM227.00